in
German Warehouse, zero distance! Make shipment faster than ever!

Knowledgebase

Search your questions?

What Do Our Customers Say?
I am able to use either DiseqC 1.1 or 1.0 alone in my setup. That time I am not facing any problem. All are working fine. But the problem starts only when I am combining 1.1 and 1.0/2.0 switch.

In DVB Dream it is fine but it is tuning to a single TP at the time (not sure how it is doing in the back end). It is not supporting blind scan so can't compare it with CrazyScan blind scan.

Now CrazyScan is updated to version 145 where we can disable Diseq 1.0 command if not used. But still there is a problem. Let me explain the problem in details based on my current setup. Please solve the problem as it is very uncomfortable even after spending USD 121 for the device.


My current setup:
7 LNBs are connected to a 1.1 switch directly.
1 Monoblock LNB is connected to the same 1.1 switch at port 1.

Switched on the device.

Opened the new CrazyScan.

Loaded the profile for port 8 of 1.1 switch. Didn't select Multi Switch. Worked correctly.

Loaded the profile for port 1 of 1.1 and port 2 of 1.0. Still didn't select Multi Switch. Worked correctly.

Loaded the profile for port 1 of 1.1 and port 1 of 1.0. Still didn't select Multi Switch. Worked correctly.

Loaded the profile for port 7 of 1.1 switch. Didn't select Multi Switch. Worked correctly.

Loaded the profile for port 8 of 1.1 switch. Didn't select Multi Switch. Not worked correctly.
It is reading from port 8 for H polarity but from port 1 of 1.1 and port 1 of 1.0 for V polarity during RF scan.

Loaded the profile for port 7 of 1.1 switch. Didn't select Multi Switch. Worked correctly.

Loaded the profile for port 8 of 1.1 switch. Didn't select Multi Switch. Not worked correctly.
It is reading from port 8 for H polarity but from port 1 of 1.1 and port 1 of 1.0 for V polarity during RF scan.

Loaded the profile for port 1 of 1.1 and port 2 of 1.0. Still didn't select Multi Switch. Not Worked correctly.
It is reading from port 1 of 1.1 and port 2 of 1.0 for H polarity but from port 1 of 1.1 and port 1 of 1.0 for V polarity.


I am not sure what exactly is the issue.

For the port 8 issue, if I am stopping and retrying, sometimes it is working correctly and sometimes not. But whenever it is working in RF scan, it is again going to port 1 of 1.1 and port 1 of 1.0 during blind scan..

What exactly that Diseqc repeat is doing bro? Sorry if this is a silly question but I am new to this USB DVBS2 devices so asking. Currently, it is defaulted to 2. I even tried setting it as 1 and 0 but still facing the issue.

Appreciate your effort in trying to solve the problem.

Thanks,
Sadiq "

EnglishMohamed

Hello

please i have problem with my moi pro amd TBS2951 with 4 card 6909 octa 8 tuners
I can not install this software on my pro amd thank you guide me how I tried several times without success now 1 month

Thank you "

EnglishBen Ahmed


More Customer Testimonials

Why I need to register your store firstly?3

BuyDVB affiliate program is still under test. In order to become an affiliate on BuyDVB, you need to register our store account firstly. Then you can send an application to our affiliate manager. Once your application is passed, you can be one of member of our affiliate.